Jurnal & Konferensi

  1. Leksono, I. N. Haq, M. Iqbal, F. X. N. Soelami and I. G. N. Merthayasa, “State of charge (SoC) estimation on LiFePO4 battery module using Coulomb counting methods with modified Peukert,” 2013 Joint International Conference on Rural Information & Communication Technology and Electric-Vehicle Technology (rICT & ICeV-T), Bandung, 2013, pp. 1-4. doi: 10.1109/rICT-ICeVT.2013.6741545
  2. N. Haq et al., “Development of battery management system for cell monitoring and protection,” 2014 International Conference on Electrical Engineering and Computer Science (ICEECS), Kuta, 2014, pp. 203-208. doi: 10.1109/ICEECS.2014.7045246
  3. A. Tamba and E. Leksono, “Adaptive backstepping for stabilization of switched nonlinear systems,” 49th IEEE Conference on Decision and Control (CDC), Atlanta, GA, 2010, pp. 1293-1297. doi: 10.1109/CDC.2010.5717241
  4. Leksono, T. Murakami and K. Ohnishi, “Cooperative motion control of multimanipulator based on workspace disturbance observer with variable compliance gain,” Industrial Electronics, Control and Instrumentation, 1997. IECON 97. 23rd International Conference on, New Orleans, LA, 1997, pp. 1379-1384 vol.3. doi: 10.1109/IECON.1997.668518
  5. A. Murti, H. A. Tjokonegoro, E. Leksono and W. Agung, “Multi-delay multi-dropout model of M2M data network for Networked Control System,” 2013 19th Asia-Pacific Conference on Communications (APCC), Denpasar, 2013, pp. 509-513. doi: 10.1109/APCC.2013.6766001
  6. Leksono, R. Prihatin and K. Kadiman, “Fuzzy auto reset controller for speed sensorless induction motor drive,” 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies, Nagoya, 2000, pp. 2321-2326 vol.4. doi: 10.1109/IECON.2000.972360
  7. Leksono, A. Wijayanto and K. Ohnishi, “Motion controller algorithm based on sliding mode controller/observer scheme,” 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies, Nagoya, 2000, pp. 1532-1537 vol.3. doi: 10.1109/IECON.2000.972502
  8. N. Haq, R. H. Saputra, F. Edison, D. Kurniadi, E. Leksono and B. Yuliarto, “State of charge (SoC) estimation of LiFePO4 battery module using support vector regression,” Proceedings of the Joint International Conference on Electric Vehicular Technology and Industrial, Mechanical, Electrical and Chemical Engineering (ICEVT & IMECE), Surakarta, 2015, pp. 16-21. doi: 10.1109/ICEVTIMECE.2015.7496640
  9. Z. Maulana, S. Hadisupadmo and E. Leksono, “Performance analysis of PID controller, fuzzy and ANFIS in pasteurization process,” 2016 International Conference on Instrumentation, Control and Automation (ICA), Bandung, 2016, pp. 171-177. doi: 10.1109/ICA.2016.7811496
  10. Anang, S. Hadisupadmo and E. Leksono, “Model predictive control design and performance analysis of a pasteurization process plant,” 2016 International Conference on Instrumentation, Control and Automation (ICA), Bandung, 2016, pp. 81-87. doi: 10.1109/ICA.2016.7811480
  11. Y. Nugraha, A. Widyotriatmo and E. Leksono, “Optimization of a grid-tied microgrid configuration using dual storage systems,” 2015 15th International Conference on Control, Automation and Systems (ICCAS), Busan, 2015, pp. 147-152.doi: 10.1109/ICCAS.2015.7364896
  12. Leksono, T. Murakami and K. Ohnishi, “Cooperative control of multimanipulator based on workspace disturbance observer considering the interaction with external force environments,” Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Tokyo, Japan, 1997, pp. 17-.doi: 10.1109/AIM.1997.652875
  13. Leksono and Pratikto, “Adaptive speed control of induction motor with DSP implementation,” 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004, 2004, pp. 1423-1428 Vol. 2. doi: 10.1109/IECON.2004.1431787
  14. Leksono, T. Murakami and M. Ohnishi, “Observer based robust force control in cooperative motion systems,” Industrial Electronics Society, 1998. IECON ’98. Proceedings of the 24th Annual Conference of the IEEE, Aachen, 1998, pp. 1801-1806 vol.3. doi: 10.1109/IECON.1998.722964
  15. Leksono, T. Murakami and K. Ohnishi, “On hybrid position/force cooperative control of multimanipulator based on workspace disturbance observer,” Proceedings of the 1996 IEEE IECON. 22nd International Conference on Industrial Electronics, Control, and Instrumentation, Taipei, 1996, pp. 1873-1878 vol.3. doi: 10.1109/IECON.1996.570758
  16. N. Haq et al., “Development of battery management system for cell monitoring and protection,” 2014 International Conference on Electrical Engineering and Computer Science (ICEECS), Kuta, 2014, pp. 203-208. doi: 10.1109/ICEECS.2014.7045246
  17. F. B. Anbya, M. Salehuddin, S. Hadisupadmo and E. Leksono, “Wireless sensor network for single phase electricity monitoring system via Zigbee protocol,” 2012 IEEE Conference on Control, Systems & Industrial Informatics, Bandung, 2012, pp. 261-266. doi: 10.1109/CCSII.2012.6470512
  18. Gunawan, Tjokronegoro HA, Leksono E, Nugraha N. Nonadiabatic Condition on the Natural Gas Energy Custody Transfer Using Orifice Flow Meter. MAPAN. 2015;30(2):77-84. doi:10.1007/s12647-015-0132-6.
  19. Marto, G. , Tjokronegoro, H. A. , Leksono, E. , Nugraha. , & Zaid, G. (2014). Chemical Composition Effects on Enthalpy Uncertainty in Natural Gas Energy Measurement System Using Orifice Meter in a Non-adiabatic Condition. International Journal of Physics, 2(5), 151-157.
  20. Sitorus PE, Nazaruddin YY, Leksono E, Budiyono A. Design ac Implementation of Paired Pectoral Fins Locomotion of Labriform Fish Applied to a Fish Robot. J Bionic Eng. 2009;6(1):37-45. doi:http://dx.doi.org/10.1016/S1672-6529(08)60100-6
  21. Gunawan, Harijono A. Tjokronegoro, E. Leksono, Nugraha, 2014, Ketidakpastian Pengukuran Energi dengan Orifice Meter : Kasus Pengaruh Panas Radiasi Terhadap Pengukuran Gas Alam pada Kondisi Non-Adiabatik, Pertemuan dan Presentasi Ilmiah KIM-LIPI ke 40, ISSN 0852-002 X, PPI KIM ke-40
  22. Gunawan, Harijono A. Tjokronegoro, E. Leksono, Nugraha, 2013, Pengaruh Kondisi Non-adiabatik terhadap Penurunan Tekanan dan Laju Alir Gas Alam dengan Menggunakan Meter Orifice, Pertemuan dan Presentasi Ilmiah KIM-LIPI ke 39, ISSN 0852-002 X, PPI KIM ke-39.
  23. Leksono, E., Pradipta, J., & Tamba, T. (2012). Modelling and Identification of Oxygen Excess Ratio of Self-Humidified PEM Fuel Cell System. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 3(1), 39-48. doi:http://dx.doi.org/10.14203/j.mev.2012.v3.39-48
  24. Pratikto, P., Nazaruddin, Y., Leksono, E., & Abidin, Z. (2012). Pengembangan Sistem Kontrol Traksi Mobil Elektrik Berbasis Rekonstruksi Keadaan Kecepatan Model Roda. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 1(2), 35-42.
  25. Putri, T., Ardhana Putra, I., & Leksono, E. (2017). Perancangan Fitur Aplikasi pada Perangkat Mobile untuk Pengukuran Bising Lingkungan dan Posisi. Jurnal Otomasi, Kontrol & Instrumentasi, 7(2).
  26. Barus RPP, Tjokronegoro HA, Leksono E, Ismunandar. Nonlinear modelling of polymer electrolyte membrane fuel cell stack using nonlinear cancellation technique. AIP Conf Proc. 2014;1617(1):71-74. doi:10.1063/1.4897107.
  27. Yulianto, N., Siregar, P., & Leksono, E. (2015). Studi Pemodelan Bond Graph dan Perancangan Pengontrol Proportional + Integral untuk Level Boiler dan Temperatur Penukar Kalor pada Sistem Miniplant. Jurnal Otomasi, Kontrol & Instrumentasi, 7(1).
  28. Murti, Muhammad Ary; Tjokronegoro, Harijono A; Leksono, Edi; Agung, Wiseto. (2016). Performance Analysis of HSPA Technology for Networked Control System Application. International Journal of Computer and Communication Engineering; Singapore5.3: 165-175.
  29. Al Faruqi, M., Leksono, E., & Romadhon, R. (2017). Perancangan Mobile Application untuk Pemantauan Boiler dan Heat Exchanger Training System Berbasis Web dengan Framework Jquery Mobile. Jurnal Otomasi, Kontrol & Instrumentasi, 7(2).

Translate »